The Cyan, Magenta, Yellow, and Black (CMYK) color scheme is used by almost all printers today to create printouts, and the Canon printer is no exception.
However, if any of these inks run out in your Canon printer, the printhead overheats and stops working correctly.
The printer stops printing and displays printer error 5200 in order to safeguard the printhead from further harm.
Additionally, the printer’s power and alarm lights will also be glowing.
Additionally, if the printhead is obstructed or the cartridge is installed incorrectly, the printer’s ink path may be disrupted, resulting in the 5200 error.
Refill the Ink
If you want to prevent printing mistakes, you should never let your printer’s ink run out.
You can visually monitor the ink levels if your ink tanks and cartridges are readily visible and reachable. Otherwise, you must use the Canon maintenance tools.
Replace the cartridge or refill the ink tank as necessary if you run out of ink.
1. Go to the View Devices and Printers section of the Control Panel.
2. Locate your Canon printer and right-click it.
3. Choose Printing preferences.
4. Go to Maintenance > Nozzle Check.
5. Click Print Check Pattern.
6. Click OK.
7. Compare the printout with the pattern check the image on your screen. You will know which color needs to be refilled after looking at it.
8. Fill the ink tank or change the depleted ink cartridge accordingly. Only use the Canon genuine ink. It will solve the error.
If you face the 5200 error even when trying to print the nozzle check pattern, it indicates a fatal state where your printer has almost no ink. Refill the ink immediately.
9. Please be aware that situations can become quite complicated if your printer generates a 5200 error despite having enough ink. In such circumstances, proceed to the fixes below to resolve this error.
Reinstall the Cartridge
A cartridge installation problem may also be the cause of the 5200 error. There is a good probability that you did not install the cartridge properly if you recently installed a cartridge and encountered the problem.
Most likely, you neglected to remove the cartridge’s thin protective coating made of plastic before installation. It stops the cartridge from being detected by the cartridge detection system.
If the film hasn’t already been deleted, check it and do so.
Additionally, if you installed a used, expired, or counterfeit cartridge in place of a genuine Canon cartridge, the printer will not print and will display an error.
Therefore, only use brand-new, original Canon ink cartridges.
If the cartridge contains enough ink but the printer is displaying the 5200 error, try adding a new cartridge.
If you break the ink cartridge during installation or have a faulty cartridge, installing a new cartridge will also be helpful.
Reset the Printer
In order to resolve any issues with the printer logic board that are creating the 5200 error, you can also reset your Canon printer.
1. Turn off your Canon printer.
2. Push the Stop button on the printer and hold it for about 3 seconds.
3. While you are at it, keep holding the ON button.
4. Then let go of the Stop button.
5. Push the Stop button consecutively five times.
6. Pull up your hands from the printer now.
7. You will see your Canon printer turning on with a blank screen.
8. Turn off the printer.
9. Power on the printer after a few seconds.
Read More: How Screen Time Can Help You if You Lose Your iPhone?
Clean the Printhead
A blocked printhead is another likely reason for a 5200 error. Either ink leftovers or external substances like paper dust might clog the printhead.
You get the 5200 error on your Canon printer when something stops the printhead from spraying ink.
The maintenance tool built into the Canon printer driver can be used to launch the automatic head-cleaning procedure.
1. Go to the View Devices and Printers section of the Control Panel.
2. Locate your Canon printer and right-click it.
3. Choose Printing preferences.
4. Go to Maintenance.
5. Run the Cleaning cycle and Deep Cleaning cycle one by one.
6. If available, also run the Ink Flush cycle.
Open the printer’s cartridge access door and take out anything preventing the printhead from moving if you are still seeing the problem after automatic head cleaning. After that, carry out the manual head cleaning procedure.
Read More: Xiaomi 13 Ultra is the Latest Phone from The Company, and It Costs a Lot to Fix.
Seek Professional Help
If none of the tips in this post were able to resolve your 5200 issue, your printer either has a bad printhead or the cartridge detection mechanism has malfunctioned.
You can buy a replacement printhead and install it on your printer if you’re comfortable working with the printer’s internal components.
If not, I advise you to get professional help or get in touch with the service center.
