Our computers are complex machines that utilise sophisticated components to execute software of equivalent sophistication. For instance, a cutting-edge video game may involve the cooperation of multiple hardware and software components. In certain circumstances, even a basic application like a web browser might strain your computer’s processing and memory.
Modern operating systems such as Windows 10 are typically quite adept at managing everything as efficiently as a well-oiled machine. However, malicious software, a programme conflict, or a hardware issue might cause problems, which can end in the dreaded blue screen. This is why many PC users learn how to boot Windows into the diagnostic mode referred to as Safe Mode. In Safe Mode, just the system’s necessary files and drivers are loaded, allowing you to identify problems more effectively.
After restarting your computer, the typical method to enter Safe Mode is to press F8, Shift+F8, or Ctrl+F8. However, it may be impossible to get the timing correct on machines with solid-state drives and a UEFI BIOS. Possibly, this is one of the few disadvantages of launching Windows from a faster drive if you are debating SSDs against HDDs. But do not fret. We can provide a few additional methods for booting your Windows 10 operating system into Safe Mode:
Sign-In Screen Method
- Click the Power button on the bottom-right of the screen.
- Click Restart while holding the Shift key.
- Click Troubleshoot.
- Click Advanced options.
- Click See more recovery options.
- Now, click Startup Settings
- You’ll see a screen that tells you that you can enable several modes, including Safe Mode, by restarting. Click Restart.
- On the Startup Settings screen, you have several options. Press 4 or F4 to enable Safe Mode, 5 or F5 to enable Safe Mode with Networking, or 6 or F6 to enable Safe Mode with Command Prompt.
Windows 10 Settings Method
- Type Settings in the search bar to find the Settings app. Alternatively, use the Win+I shortcut for Settings.
- Click Updates and Security.
- Click Recovery on the left-hand menu.
- Click Restart.
- Click Troubleshoot.
- Click Advanced Options.
- Click Startup Settings.
- Click Restart.
- Press 4 or F4 to enable Safe Mode, 5 or F5 to enable Safe Mode with Networking, or 6 or F6 to enable Safe Mode with Command Prompt.
Also Read: Top 10 Ways to Fix a 100% Disk Usage On Windows 10
Three Boot Interruptions Method
Windows will automatically enter Automatic Repair mode after three consecutive regular boot failures. This interruption may be caused by virus, defective software, or faulty hardware. You can also initiate this by manually restarting your computer three times while the operating system is loading. We advocate this as a last resort because powering down your computer can be detrimental to its software, files, and hard disc drive (HDD).
After entering Automatic Repair, take these steps to enter Safe Mode:
- Advanced Options > Troubleshoot > Advanced Options > Startup Settings > Restart.
- Now, press 4, 5, or 6 for the Safe Mode option you prefer.
USB Recovery Drive Method
Consider generating a USB recovery CD if Windows cannot be started. You can build one on a machine running the same version of Windows as yours. You may also need to configure your computer’s BIOS to load Windows from the recovery CD instead of the hard drive until the computer is repaired.
- Start the recovery disk.
- Now, select your keyboard layout from your USB recovery drive, and click Troubleshoot.
- Now, click Advanced Options > Startup Settings > Restart.
- Select the right Safe Mode option for your needs.
For Windows 10 Safe Mode Command Prompt access:
- Click select Command Prompt in Advanced Options after you choose to Troubleshoot.
- Type bcdedit /set {default} safeboot minimal and press Enter.
- Close the Command Prompt Window and pick Continue.
- Now, your computer will restart in Safe Mode.
Also Read: How to Fix the 403 Forbidden Error (8 Methods)
How to Turn Off Safe Mode Windows 10
You can exit Safe Mode by simply restarting your computer. Press the Start button, the power button, then the Restart button. To disable Safe Mode using the Command Prompt, enter “bcdedit /deletevalue current safeboot” and hit Enter. “shutdown /r” restarts the computer system.
Windows 10 Antivirus software routinely detects for viruses, preventing circumstances that could necessitate Safe Mode. Understanding how to simply check for and apply Windows updates can also help you maintain the health of your computer. Finally, eliminate the danger of hardware failure by removing dust and protecting your system from voltage fluctuations using a surge protector.
