Your laser printer may be out of toner if you aren’t obtaining the kind of print results you want. Therefore, you may see error warnings such as Cartridge is extremely low, Toner is very low, and many more. You must swap out your printer’s outdated toner with a new one in order to solve the problem.

On laser printers, integrated drum-toner setup and detachable drum-toner configuration are the two main toner setup types. Even though the setups are different, both kinds of printers’ toner replacements are rather simple. You should use caution when replacing the toner in your laser printer, though.

Don ts of Replacing Toner in the Printer

When you need to replace the toner in your printer, keep the following items in mind.

  • Do not replace the toner immediately after using the printer. Turn off your printer and wait about an hour to let the printer fuser cool down.
  • Always turn on your printer before changing the toner.
  • Do not use refilled or counterfeit toner.
  • Unpack the new toner from the packaging only at the time of replacing it. Do not expose it to the external environment unnecessarily.
  • Do not change the toner in a sunny room.
  • Be careful while removing the toner that is not completely empty. You may spill the toner powder on your hands and clothes.
  • Be gentle while removing the old toner from the printer. Always remove it straight, not at an angle
  • Do not dispose of the old toner haphazardly. You may give it to the recycling center.
  • If you spill the toner powder, never use a vacuum cleaner to clean it. Use a damped cloth instead.
  • Wait about an hour before replacing the toner if it was stored in a cool environment. The temperature difference can cause condensation inside the toner and damage it.
  • Shake the new toner gently before inserting it into your printer. It helps toner powder spread evenly inside the toner.
  • Remove the protective caps and sealing tape from the toner before inserting it into the printer.
  • If you have a color laser printer, insert the color cartridge correctly into its respective color slot.
  • Do not touch the roller in the drum unit when you are changing the toner.
  • If you can not close the access door after inserting the cartridge, re-open the door and insert the toner correctly.

Replace Toner in Brother Printer

A separate drum-toner device is included with the majority of Brother printers. In other words, the toner and drum units are distinct, and you must separate the toner from the drum unit before changing it.

  1. Power on the printer.
  2. Open the front panel door to access the drum unit.
  3. Grasp the older drum unit using its handle and remove it from your printer.
  4. Keep the drum unit aside.
  5. Press the lock lever to remove the toner from the drum.
  6. Keep the old toner aside.
  7. Now bring the new toner.
  8. Get it out of the packaging and remove the protective caps and tabs.
  9. Hole the toner by its sides.
  10. Place the new toner over the drum and press it lightly. The toner will now be locked into the drum unit with a snap sound.
  11. Now clean up the corona wire by gliding the cleaning tab. Glide the tab horizontally across the drum unit about 3-4 times.
  12. After cleaning the corona wire, get the cleaning tab back from where you started gliding.
  13. Grasp the drum unit and insert it into your Brother printer. Fit it properly into its place.
  14. Close the front door.
  15. You will see Ready on your printer s screen once it detects the new toner and is ready to use.

Replace Toner in HP Printer

Replace Toner in Printer

HP printers include an integrated drum-toner unit, in contrast to Brother printers which ship with a separate drum-toner component. When you change the toner cartridge, it implies that the drum unit is also changed.

  1. Access the toner area by lifting the scanner assembly and top cover of the printer.
  2. Hold the old toner using its handle and pull it out. Keep it aside.
  3. Unbox the new toner from the package.
  4. Remove the protective tabs and clips. Some toners may have an orange-colored sealing tape equal to the length of the toner coming out from the side. Pull it out straight from the toner to remove it.
  5. Grasp the new toner and slide it inside the printer. You should properly align the toner in its place. You will hear a click sound after it gets correctly into its position.
  6. Get the top cover and scanner assembly down.

Read More: Canon Printer Printing Blank Pages? Use These 7 Time-Tested Solutions!

Replace Toner in Canon Printer

Replace Toner in Printer

Canon printers use a single unit for drum-toner assembly, just like HP printers do. It implies that when you replace the toner unit, you also replace the drum unit.

  1. First, lift up the scanner assembly. Then, lift the top cover of your Canon printer.
  2. Grasp the handle in the middle of the old toner and remove it.
  3. Unpack the new toner and remove orange-colored protective clips, one on each side of the toner.
  4. Pull out the sealing tape straight out of the toner.
  5. Firmly insert the new toner into its place.
  6. Close the top cover and then lift down the scanner assembly.