RAID 0 and RAID 1 are the most fundamental RAID levels available. Their data distribution is easy to understand, and the setup is less complicated. Their main goal is to offer better speed, redundancy, and fault tolerance, just like any other RAID type.

RAID 1 adheres to the disk mirroring or shadowing theory while RAID 0 is based on disk striping. The latter is totally performance-driven but has slower read/write speeds than the former and doesn’t offer redundancy.

These are the only RAID options you’ll have if you only have two storage drives, as most of the others need at least three. You must select between fault tolerance and greater performance when contrasting RAID 0 and RAID 1.

Which one do you think would be best for you? Let’s go into more depth about each of them and how they differ.

What is RAID 0?

RAID 0, or a redundant array of independent/cheap drives, separates the data into blocks or stripes and stores them on different disks. Disk striping is what this is known as technically.

Data A, for instance, is divided into two stipes if you have RAID 0 configured with two storage disks. The odd bits (A1, A3, A5, and A7) will be stored on one disk, and the even bits (A2, A4, A6, and A8) will be stored on the other.

RAID 0’s operation differs depending on the storage system. While others use byte, block, or partition-based striping, some may cluster the data.

The performance will improve because read/write operations are performed simultaneously on the same data across numerous disks. The utilization of two drives in the aforementioned case provides twice the bandwidth as compared to a single disk.

RAID 0 vs RAID 1

Although RAID 0 offers the best performance, it is less reliable than one might expect. Even if one of the drives dies, you will ultimately lose your data because a single piece of information is stored across numerous disks.

Therefore, using multiple drives (like 4, 5, or even more) in RAID 0 would be a bad idea. However, this is the best RAID level available if all you’re looking for is extreme performance.

It’s perfect for non-critical storage, gaming, video editing, and live broadcasting. Recall that if you want to back up important files, you should never think of using RAID 0.

Several users I’ve encountered have implemented RAID 0 on HDDs to boost performance. Well, there are two main reasons I do not advise doing this. Regardless of the number of hard disks you use for the RAID 0 setup, a single SSD will perform far better. Second, compared to a solid-state drive, the likelihood of an HDD failing is substantially higher.

Despite this flaw, RAID 0 is still the simplest to set up and the least expensive because it only requires two disks. Furthermore, none of the hardware controllers implement parity data, despite the fact that they all do. For better examination, I’ve outlined its advantages and disadvantages below.


  • Improved Performance (read/write speed increased)
  • Lower costs
  • Easy to implement
  • All hardware controllers support it
  • No overhead
  • Utilizes all the available storage capacity
  • Applicable for gaming, video editing, and non-critical storage purposes

  • More prone to failure
  • No data redundancy
  • Not applicable for critical backups
  • May not be suitable for HDDs
  • Since no parity is used, reliability is hampered (data recovery is difficult or almost impossible)

What is RAID 1?

Data redundancy is what RAID 1 (Redundant Array of Independent/Inexpensive Disks 1) is all about; RAID 0 does not. Data is copied from one disk to the other via disk mirroring at this RAID level.

Data A from the first storage drive is duplicated to the second, for instance, if you have set up RAID 1 with two storage drives. A1, A2, A3, and A4 from Disk 0 are cloned onto Disk 1, as seen in the image above.

This makes sure that even if one disk fails, the controller can still use the data from the other disks in the array. Now, you can quickly recover the data by simply repairing or replacing this drive.

Because of these factors, RAID 1 is the most reliable and available option. Despite providing redundancy and fault tolerance, this method of implementation suffers in terms of performance, storage capacity, and cost.

It is clear that this has a detrimental effect on speed because the same data needs to be read and written twice. RAID 0 can, however, offer better read speed if the RAID controller employs multiplexing. The writer’s performance is unaffected in this situation.

Similarly to this, RAID 1 dramatically reduces effective storage capacity to 50%. Despite employing two or more physical drives, you can only use half of the available storage because the other half is being used for mirroring.

Because one drive is used for primary storage and the other for mirroring, RAID1 needs an even number of disks. For employing the odd number of disks, you can use RAID1E, a nested RAID that employs both mirroring and striping techniques. We’ll go into more detail about this subject another day.

For instance, you can anticipate receiving 2 TB of storage if you have used two 1 TB drives. However, since the additional 1 TB is used to create a shadow copy of the first disk, you’ll only have 1 TB of total storage. You’ll need to add a disk pair to the array to gain the actual storage, which will increase your costs.

In light of these considerations, RAID 1 is appropriate for long-term uses. Even a local backup using this RAID level is possible. However, because there is a chance of failure, you shouldn’t use it as your primary backup solution. Additionally, mirroring serves as data protection rather than a true backup.


  • Offers fault tolerance and data redundancy
  • Easy data recovery
  • Offers data protection as one disk will always store your data
  • Applicable for local backup
  • Easy to implement
  • Read operation remains the same when only one disk is used for reading
  • Read performance is improved when the RAID controller uses multiplexing

  • Decreased read/write performance
  • High cost
  • Reduced storage capacity
  • Software RAID 1 does t support hot-swap of the drives

Differences Between RAID 0 and RAID 1

Simply put, RAID is a virtualization technique for data storage that joins many disks into an array to make them function as a single entity. Its main goal is to increase performance, add redundancy, or accomplish both.

In the same way, RAID 0 and RAID 1 are different. If you want excellent performance at a low cost, you can choose the former, or you can choose the latter for better security and dependability. I’ll do my best to adequately cover the key distinctions in this section.

Read More: The Online Stock Brokers’ Bull Run Hits a Bump, and The Number of Regular Users Goes Down.

Data Redundancy

The most common use of this technology is redundancy, which is represented by the R in RAID. However, if you look at how RAID 0 organizes its data, it in no way succeeds in doing that. Many users are debating whether or not to classify this level as RAID itself in light of this.

As was previously mentioned, RAID 0 operates by striping or dividing the data across two or more disks. The data must be replicated or shadowed in order to create redundancy, which is what the RAID 1 level provides.

Even one method of ensuring reliability and availability is data redundancy. You can be sure that your crucial files and papers are stored safely on a different disk when your data is replicated. Additionally, even if one disk fails, which I will discuss next, the data is always accessible.

Fault Tolerance

RAID 1 should be your best option if you’re concerned about the security of your data. This is due to the fact that all of your data is kept as a copy on a different disk and is retrievable even in the event of a failure. In essence, it offers data security against potential drive failures.

RAID 0 does not, however, provide fault tolerance. The information is split up among various disks. While this does result in higher throughput, the RAID setup as a whole fails even if one drive becomes corrupt. In this instance, data recovery is actually all but impossible.

Read More: Italy Brought Back ChatGPT after Microsoft-Backed OpenAI Answered Regulators’ Questions.

Read/Write Performance

When experimenting with new technology, high performance is a must. Although RAID 1 may provide more fault tolerance and redundant data, the write operation is significantly impacted. Additionally, there isn’t much of a difference in how well it reads.

The controller must execute the write operation twice in RAID 1 in order to write a single piece of data. thus impacting how well it performs.

The controller can read from any of the disks during a read operation, though. Therefore, compared to using a single drive, there isn’t much of a difference in its performance. However, the read performance can be improved if the RAID controller supports multiplexing.


RAID 0 on the other hand, stores data in stripes across several disks. Multiple disks are used concurrently during a read operation to speed up the retrieval of the data. Similar to reading, writing involves simultaneously storing data across several drives.

Imagine two people working together to complete a single task. It is apparent that the output will more than double compared to what a single individual might have produced.

Read More: Italy Brought Back ChatGPT after Microsoft-Backed OpenAI Answered Regulators’ Questions.

Effective Storage Capacity

The usage of the total storage is another significant distinction between RAID 0 and RAID 1. Since RAID 0 doesn’t provide redundancy and divides data into multiple stripes, its storage is unaffected. This indicates that its actual capacity is 100%.

RAID 1 offers redundancy by mirroring your data, though. It implies that you can only utilize half of the available storage. Its effective capacity is thus decreased to 50%, to put it another way. The smaller storage space is completely justified, though, because RAID 1 secures your data by maintaining shadow copies.

Write Penalty

The performance of RAID levels that use mirrored or parity-based configurations is affected by a factor called write penalty. There isn’t a write penalty in this situation (it can be counted as 1) because RAID 0 doesn’t replicate the data and doesn’t apply parity.

RAID 0, however, has a mild write penalty. This is due to the fact that it conducts the write operation twice and mirrors the data into two other drives. Its write penalty is therefore calculated to be 2.


Because RAID 0 can use all of its storage capacity, it doesn’t need sufficient redundancy. As a result, your RAID arrangement does not require the addition of a further HDD or SSD.

With RAID 1, the situation is exactly the opposite. In order to ensure data redundancy through duplication, its storage efficiency is cut in half. Therefore, the only option if you need a dedicated amount of storage is to physically add an additional drive, which can be expensive.

Read More: Pinterest’s Problems With Ads Hurt the Company’s Ability to Make More Money, and Its Stock Price Drops.

Similarities Between RAID 0 and RAID 1

RAID 0 and RAID 1 have many differences, but they also have several things in common. They are the most fundamental methods for implementing RAID, and they are simple to set up and comprehend. Also, keep in mind that implementing them requires at least two drives.

There is no overhead as neither of them needs parity drives. Other RAID levels, however, make use of parity, which can further enhance data security and fault tolerance. You may read more about RAID 5 and RAID 6 in our other guide.

In terms of hardware and software, RAID 0 and RAID 1 are both simple to set up. You can use the built-in Disk Management tool in Windows to set up software RAIDs. For RAID 0, choose New Stripped Volume, and for RAID 1, choose New Mirrored Volume.

Interesting RAID levels that increase performance and fault tolerance have previously been developed. These include RAID 01 (0+1), RAID 1E, and RAID 10 (RAID 1+0)

Among all, RAID 10 is the most well-liked. It makes use of RAID 0 as the bottom layer and RAID 1 as the top layer. Data is first mirrored across the drives, after which each set is striped. As a result, this can contribute to both redundancy and high performance. Similarly to this, striping comes first in RAID 01, then mirroring.

Final Comparison RAID 0 vs RAID 1

For two separate people—one who wants great performance and another who wants reliability—RAID 0 and RAID 1 are available. In the end, it all depends on your unique needs and preferences.

If you want to maximize disk space, get the best read/write performance, and save money, you should choose RAID 0. But you should choose RAID 1 if you want better data protection and recovery with less storage and a higher price. The comparative chart below should put all of your questions to rest.

Factors RAID 0 RAID 1
Data Organization Disk striping Disk mirroring
Read Operation High performance Better performance than a single disk
Write Operation Better than on a single disk Slower performance than on a single disk
Data Redundancy No Yes
Fault Tolerance No Yes
Minimum Disks Required 2 2 (even number of disks)
Parity Disks No No
Storage Efficiency 100% 50%
Data Protection No protection Offers protection during drive failure but not against human errors and natural damages
Data Recovery Data is lost forever Data can be recovered from the other drive containing the copy
Backup Not recommended Ideal for local backup (still not recommended)
Write Penalty No (1) Moderate (2)
Cost Comparatively cheap Comparatively expensive
Applications Live Streaming, Gaming, Video Editing, etc. Accounting Systems, Operating Systems, and other mission-critical applications